Waterborne Acrylic Modified Saturated Polyester Resin WL-187
Water Based Saturated Polyester Resins are oil free non-oxidizing resins. These resins are intended to be crosslinked with amino resins through their free hydroxyl functionality. Crosslinking can be done with with melamines and urea resins. When properly formulated, these resins can give very high quality industrial finishes.
• Non yellowing, even at high temperature curing
• Good hardness development
• Excellent solvent and chemical resistance (over 100 MEK)
• Excellent adhesion in direct-to-metal applications
1, Product Composition:
Waterborne Acrylic Modified Saturated Polyester Resin, Butanol
2, Typical Data:
| Item |
WL-187 |
Test Method |
| Appearance |
light yellow transparent liquid |
Visual Observation |
| Non-volatile Matters(%) |
75±2 |
30min@120℃ |
| Viscosity(mPa*s) |
30-80 |
NDJ-79 Rotational Viscometer(1: 1 PM dilution) |
| Hydroxyl Value (mgKOH/g) |
115 |
(For solid resin, theoretical value) |
| Acid Value(mgKOH/g) |
22.7 |
(For solid resin, theoretical value) |
| Diluted by water |
infinite dilution |
---- |
| Density (g/cm3) |
1.062 |
Densimeter |
3, Product Properties:
Waterborne Thinnable Acrylic Modified Saturated Polyester.
Low VOC, high gloss and hardness, excellent flexibility and fullness.
Good solvent resistance and hydrolysis resistance.
Excellent shear stability, can be grinded with dispersions directly.
Good storage stability.
4, Instructions:
After neutralized by N,N-2 methyl diethanolamine, WL-187can be diluted by water directly. The adding amount of amine takes 4-5% of theresin. The product can be baked and cured with etherfied amino resins. It is suggested that the amino resins should be added by 25%-35%(for solidresins).Our company has the matching catalyst CATO1. The baking temperature is more than 140℃.
The PH value can be adjusted by N, N-2 methyl diethanolamine. And the viscosity of aqueous solution will increase with the increase of PH value.
5, Storage:
It is suggested that the product should be stored in a cool and dry place at 0-40℃. The quality guarantee period is 1 year, and the expired productscan still be used after passing the inspections.
6, Applications:
Decorative waterborne polyester amino baking coatings.
7, Note:
The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Product Tags:
|
|
Hardware Paints Water Based Polyester Resin Excellent Solvent And Chemical Resistance Images
|
